Данный F.A.Q. составлен по материалам из свободных источников интернета,
писем читателей рассылки "EVM-News" и личного опыта составителя.
1. Подключение IrDA к материнской плате.
Abit
(http://www.abit.com.tw)
Acorp
Albatron
Asus
(http://www.asus.com)
A-Trend
(http://www.riascorp.com/pc_solutions)
Biostar
(http://www.biostar-europe.com)
Chaintech
(http://www.chaintech.com.tw)
DFI
(http://www.dfi.com)
Elitegroup
(http://www.elitegroup.de)
ENMIC/NMC-PE
(http://www.enmic.de)
Epox
(http://www.elito-epox.com/)
FIC
(http://www.fic.com.tw)
Gigabyte
(http://www.gigabyte.com.tw)
Intel
(http://www.intel.com)
Isus
(http://www.isys.com.tw/ )
Inne plyty
Lucky Star
(http://www.lucky-star.com.tw/)
Legend QDI
(http://www.qdi.nl/german)
Medion
(http://www.medion.de/)
MSI
(http://www.msi.com.tw/)
PCchips
(http://www.pcchips.com/)
PCPartner
(http://www.pcpartner.com.hk/
)
Siemens
(http://www.fujitsu-siemens.de/
)
Shuttle Spacewalker
(http://www.spacewalker.com/
)
Soltek
(http://www.soltek.de/
)
Soyo
(http://www.soyo.com/
)
Tekram
(http://www.tekram.de/
)
Tyan
(http://www.tyan.de/
)
Abit
BE6 Rev. 1.0, BH6 Rev.2
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx Integrated Peripherials: Onboard IR function: IrDA RxD,TxD active: hi,lo IR transmission delay: enabled
BH6 Rev. 1.0
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx IrDA HI,LOW & Delayed
BM6
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx Hi/Hi Ir Transmission Delay: Disabled
BP6
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx Onboard IR function: IrDA RxD,TxD active: hi,lo Ir Transmission Delay: Disabled В некоторых версиях BIOS: IR Transmission delay: Enabled
BX6 Rev.2
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
KT7, KT7 RAID
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx Onboard IR Funktion: HPSIR IR-Funktion Duplex: Full Ewentualne: Half
AcorpПросьба, если вы нашли ошибку или у вас есть что дополнить сообщите на: msevm@mail.ru
6ZX86(SLOT)
Integrated Peripherals: Uart2 mode: IrDA 1.0 Duplex Select: Full Tx, Rx Active: Lo, Hi
7KTA2E
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx Integrated Peripherals: UATR 2 MODE -> HPSIR IR FUNCTION DUPLEX -> HALF TX,RX INVERTING ENABLE -> NO,YES
Albatron
PX845PEV/Pro
(6 pins) 3=Vcc, 4=GND, 5=Tx, 6=Rx Onboard SP2: 2F8/IRQ3 UART Mode Select: IrDA RxD,TxD Active: Hi,Lo IR Transmission Delay: Enabled UR2 Duplex Mode: Half US IR Pins: Half
Asus
A7V8X-X - не поддерживает IrDA P4P800 - не поддерживает IrDA
P4B533
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx Advanced: I/O Device Configuration: UART2 Use as: IR
TX97
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx Chipset Features Setup: UART2 Use Infrared: Enabled
TUSL2-C
(2x12 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx BIOS Setup --> Advancer --> I/O Device Configurator: UART2 Use as: [IR] Onboard CIR I/O: [Disabled]
A-Trend
ATC-6130, ATC-6230
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Biostar
M6TLG
(2x13 pins) 22=Vcc, 24=Rx, 25=GND, 26=Tx
M6TBA
(2x13 pins) 22=Vcc, 24=Rx, 25=GND, 26=Tx Integrated Peripherials Setup: Uart 2 Mode: IrDA SIR Level Lo/Hi
M7MKA
(2x13 pins) 22=Vcc, 24=Rx, 25=GND, 26=Tx Uart Mode Select: IrDA Uart 2 Duplex Mode: Full Rxd,Txd Active: Hi,Hi Ir Transmission delay: Enabled
M7MKE
(2x13 pins) 22=Vcc, 24=Rx, 25=GND, 26=Tx Uart 2 Mode: HPSIR IR Function Duplex: Full TX,RX Inverting enable: No,Yes
Chaintech
5AGM2
(2x4 pins) 3=GND, 4=GND, 6=Rx, 7=Vcc, 8=Tx
5IFM-1, 5TDM2 Baby-AT, 6VTA2 Baby-AT, 6LTM2 Baby-AT
(6 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx, 6=Vcc Com2 Mode: Irda Infrarot Mode: full deplex CT-6OJV
(2x6 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
DFI
P5BV3+, P6BV3+ (/66), K6XV3+ (/66)
(5 pins) 1=Tx, 2=GND, 4=Rx, 5=Vcc
Bios Mode: HPSIR Duplex: Full Use IR Pins: TX2RX2
Elitegroup
K7S5A Rev.1 & Rev.3
(2x3 pins) 3=Vcc, 4=GND, 5=Tx, 6=Rx
Serial Port2 Mode: IrDA
K7S5A+, K7S5A2, K7S6A
(2x3 pins) 3=Vcc, 4=GND, 5=Tx, 6=Rx
UART Mode Select: IrDA UR2 Duplex Mode: Half albo Full
P5VP-A+, P5VX-BE, P6BAT-A+, K7VTA1, K7VTA3
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
ENMIC/NMC-PE
3VAX, 5VM5, 5VMe (e/x)
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
UART 2 MODE: HPSIR Duplex: Full Pegel: Lo,Hi
6BB (x)
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
UART-Mode: IrDA RxD,TxD Active: Hi,Lo IR Transm Delay: Disabled
7VAX, 8TTX+
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
UART 2 Mode: HPSIR IR Function Duplex: Full RxD Active: Lo,Hi
Epox
EP-7KXA, EP-8KTA+, EP-8KTA3 (+), EP-MVP3C2
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Uart2 Mode: HPSIR Ir Function Duplex: Full Tx,Rx inverting mode: No,Yes
EP-MVP3E-M, EP-MVP3G5
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
UART Mode 2: HPSIR IR Function Duplex: Duplex RxD, TxD active: Lo, Hi.
8RDA3+
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
UART Mode Select: [IrDA] RxD, TxD Active: [Hi,Lo] IR Transmission Delay: [Enable] UR2 Duplex Mode: [Full] Use IR Pins: [IR-Rx2Tx2]
8K9A
UART mode Select [IRDA] RxD, TxD Active [Hi, Lo] Ir transmission delay [Enable] UR2 Duplex Mode [Full] Use ir Pins [Ir-Rx2Tx2]
FIC
KA-6130, PA-2007, PA-2012
(2x5 pins) 1=Vcc, 3=Rx, 5=GND, 7=Tx, 9=Vcc
Uart2 Mode: HPSIR Ir Function Duplex: Full Rx,Tx Active: Lo,Hi
Gigabyte
GA-586HX, GA-5SG100
(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc
GA-5AA Rev. 3.2
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Integrated Perpherals: Onboard serial port: COM 3 Serial Port Mode: IrDA
GA-686LX
(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc
Integrated Perpherals: Onboard serial port 2: AUTO IR address select: 3e8h IR mode: HP SIR IR IRQ select: IRQ 3
GA-6BA, GA-6BXE
(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc
Onboard Serial Port 2: Auto UR2 Mode: IrDA 1.0 UR2 Duplex Mode: Half
GA-6BA, GA-6BXE
(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc
Onboard Serial Port 1: AUTO UART 2 Mode: HPSIR IR Function Duplex: Full TX, RX Inverting Enable: No, Yes
GA-6OMM7
(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc
GA-6OXM7E-1, GA-60X
(10 pins) 1=Vcc, 3=RX, 4=GND, 5=TX
Integrated Perpherals:
UART Mode Select: IrDA
UR2 Duplex Mode: Half
GA-71XE4
(5 PINS) 1=VCC, 2=NC; 3=IR DATA INPUT; 4=GND; 5=IR DATA OUTPUT
Integrated Perpherals:
Serial PortB Mode: IrDA
Duplex Mode: Half Duplex
GA-7VA-C - не поддерживает IrDA
GA-7ZX, GA-7ZXR
(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc
Integrated Peripherals: Serial PortB Mode: IrDA Duplex Mode: Half Duplex
IPE1000G, 8IPE1000 (10 pin) 1=Vcc, 3=Rx, 4=GND, 5=Tx
IrDA -> Enable
Intel
SR440BX, Advanced/ZP Baby-AT Board (Zappa)
(5 pins) 1=Tx, 2=GND, 3=Rx, 5=Vcc
D845HV, D845WV
(2x8 pins) 9=Vcc, 11=Rx, 13=GND, 15=Tx
Isus
i2k-10V (VIA MVP4 Chipset)
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Integrated Peripherals: IR/COM2 Mode Select: IrDA (HPSIR)
Inne plyty
P5I430VX/250, Plyta z VxPro+ Chipset Via
(4 pins) 1=Rx, 2=GND, 3=Tx, 4=Vcc
BPR5 R2 PCI Mainboard, FT440BX
(5 pins) 1=Vcc, 3=Tx, 4=GND, 5=Rx
Lucky Star
PV-1A
(4 pins) 1=Rx, 2=GND, 3=Tx, 4=Vcc IR-Mode: HP SIR
6ABX2V, 6VBX2
(7 pins) 1=Rx, 2=GND, 3=Tx, 4=Vcc, 7=GND
Legend QDI
5ALI61, KINETIZ 7B
(6 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx, 6=Vcc
Medion
9901
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
MSI
K7Pro (=MS6195)
(2x5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
COM2 Typ: IrDA
MSI K7T Pro (MS-6330)
(2x5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Integrated peripherals: UART 2 Mode: HPSIR IR Function Duplex: half TX, RX inverting enable: No, Yes
MSI-6117, MSI-6119, MSI-6151
(2x5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
UART Mode: Irda Rxd,Txd Active: Hi,Lo IR Tansmitiondelay: Enabled
MSI MS-6199VA
Integrated peripherals UART Mode select: IrDA RxD,TxD active: hi,lo IR transmission delay: enabled
K7T266 PRO2-RU (MSI-6380)
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx Integrated peripherals Serial Port2 Mode: 3/16 Baud IR Duplex Mode: Half Duplex IR Pin Select: IRRX/IRTX
KT3 Ultra2
(2x3 pins) 3=Vcc, 4=GND, 5=Tx, 6=Rx
Integrated peripherals Serial Port2 Mode: 3/16 Baud IR Duplex Mode: Half Duplex IR Pin Select: IRRX/IRTX
PCchips
M761 Rev. 3.1b
(7 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx, 6=Vcc, 7=GND
PCPartner
VIB423DS
(5 pins) 1=Rx, 2=GND, 3=Tx, 4=Vcc
Siemens
D981
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Shuttle Spacewalker
AB61, HOT-579, Inne
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Soltek
SL-54U5, SL-67B, SL-67FV1, SL-77KV
(2x15 pins) 6=Tx, 7=GND, 8=Rx, 10=Vcc
Soyo
5BT5, 6VBA133
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx
Intergrated Peripherals UR2 Mode: IRDA 1.0 UR2 Duplex Mode: Full
Tekram
P5MVP-A4 Rev. 1.1
(5 pins) 1=Vcc, 3=Rx, 4=GND, 5=Tx Intgerated Periphals Setup: Infrared/COM2 Selected: IrDA SIR (HPSIR)
Tyan
Trinity 100 AT S1590
(2x15 pins) 6=Vcc, 8=Rx, 9=GND, 10=Tx
Copyright © R9AL 2002 Все права защищены
